In human life is surrounded by a variety of objects made of different materials. Many materials can corrode when exposed to corrosive environments, moisture and heat. Destruction materials due to corrosion of the international community does enormous economic damage, so the corrosion control – one of the most important tasks that must be solved to man. Corrosion protection helps to avoid destruction of materials of different materials and designs. Corrosion protection is any corrosion control coating material over a long period of time. At the present time for corrosion-resistant coating is often used a variety of coating materials (paints). The simplest option – Enamel PF-115, applied to the primed surface.
Priming can be used GF-021 primer. It should be bear in mind that should be used high quality materials, quality of which meets state standards. Only in this case, you can get long-lasting corrosion protection. Coating obtained from using paints made from low-quality low-cost raw materials can not be a good protection against corrosion. The choice of coatings for corrosion-resistant coating make, given the conditions operation and application, the timing requirements of the protective effect of (small – up to 5 years, average – 15 years long – more than 15 years). At the same time period referred to must meet the design life of the protected product. The durability of the coating depends on many factors, but one of the basic – preparing the surface for coating products. To obtain coverage with a long service life is required blasting and application of high-performance epoxy-polyurethane paint compositions, such as universal anticorrosive composition "Gremirust" in conjunction with ground-enamel AU-1-201 or with polyurethane enamel UR-1524M, as well as enamel EP-1267. These compositions are not inferior to the characteristics of imports, and in the global financial crisis were clearly preferred. Today, the production and use of anti-corrosive materials – promising activity. Developed and applied in the production of cleaner and more technologically advanced anti-corrosive coatings